China factory/exporter of Hi-Power LED ROAD/STREET LAMP

We are the first compnay in China producing the LED Stret Lamps with the power above 100W.
We got CE approval, ISO9001:2000 and 8 China National Patents.

Long Lift: 50,000 hours ~ 100,000 hours.

High Efficiency: >85%; Power Factor (PF): >95%

Without ultraviolet and infrared radiation; Friendly Environment Material: without lead and mercury.

Thermal Contorl: the temperature rise will not exceed 20°C.

Special Over Current Protection: each LED buld is equipped with current Protection.

Wide Range of Voltage: 85V~260V AC, promp starting.

Wide Range of Applicable Areas: it can match with solar and wind energy systme.
Voltage Flexible Choices: 12/24V DC or 110/220/240V AC.

Large Luminous Radius: our LED street lamps can reach 120° or above.

Good Color Rendering: the color index up to 80CRI, really indicate the original colors.

High power LED street lamp

Item No: HPLED 001

China Faryuan Supply: High Power LED street lamps are with long service life, energy conservation, environmental protection, high luminance, good stability, easy installation and good suitability, etc.

• Uniformly distributed light and color without lens or halo.
• Great illuminating angle:
• Accurate constant-current driving with current fluctuation less than 1mA
• Strict temperature control
• Special circuit protection
• Variable power

Main applications: Solar Products, the street lamps on main and minor road.

50W Hi-power LED Street Lamp

Item No: HPLED 50W

• Uniformly distributed light and color without lens or halo.
• Great illuminating angle:
• Accurate constant-current driving with current fluctuation less than 1mA
• Strict temperature control
• Special circuit protection
• Variable power
Main applications: For Road or Street Usage.
Voltage: 12/24V DC,110/220V AC
Luminous flux: 3500lm
Service life: >50000 Hours
Color Rendering :> 80CRI Casing Material: Aluminum alloy die casting
Dimension: 530mm×260mm×140mm

80W Hi-power LED Road Lightings

Item No: HPLED 80W


LED Quantity: 80pcs
Power: 80W
Voltage: 12/24V DC,110/220V AC
Luminous flux: 5600lm
Service life: >50000 Hours
Color Rendering :> 80CRI
Casing Material: Aluminum alloy die casting
Dimension: 860mm×310mm×200mm

100W Hi-power LED Road Lampes

Item No: HPLED 100W

LED Quantity: 100pcs
Power: 100W
Voltage: 12/24V DC,110/220V AC
Luminous flux: 7000lm
Service life: >50000 Hours
Color Rendering :> 80CRI
Casing Material: Aluminum alloy die casting
Dimension: 860mm×310mm×200mm

High power LEDs Road Lamps

High power LEDs (HPLED) can be driven at hundreds of mA (vs. tens of mA for other LEDs), some with more than one ampere of current, and give out large amounts of light. Since overheating is destructive, the HPLEDs must be highly efficient to minimize excess heat; furthermore, they are often mounted on a heat sink to allow for heat dissipation.
If the heat from a HPLED is not removed, the device will burn out in seconds. (Solid-state lighting and LED lamp)

A single HPLED can often replace an incandescent bulb in a flashlight, or be set in an array to form a powerful LED lamp.

LEDs have been developed that can run directly from mains power without the need for a DC converter. For each half cycle part of the LED emits light and part is dark, and this is reversed during the next half cycle. The efficiency of HPLEDs is typically 40 lm/W[42]. As of November 2008 some HPLEDs manufactured by Cree, Inc exceed 95 lm/W [43] (e.g. the XLamp MC-E LED chip emitting Cool White light) and are being sold in lamps intended to replace incandescent, halogen, and even fluorescent style lights as LEDs become more cost competitive.

Descriptions of Street light, Road Lamps

A street light , lamppost, street lamp, road light, light standard, or lamp standard is a raised source of light on the edge of a road, which is turned on or lit at a certain time every night.

Modern lamps may also have light-sensitive photocells to turn them on at dusk, off at dawn, or activate automatically in dark weather. Also, it is not uncommon for street lights to be on posts which have wires strung between them, such as on telephone poles or utility poles.

Today, street lighting commonly uses high-intensity discharge lamps, often HPS high pressure sodium lamps. Such lamps provide the greatest amount of photopic illumination for the least consumption of electricity. However when scotopic/photopic light calculations are used, it can been seen how inappropriate HPS lamps are for night lighting. White light sources have been shown to double driver peripheral vision and increase driver brake reaction time at least 25%. When S/P light calculations are used, HPS lamp performance needs to be reduced by a minimum value of 75%. This is now a standard design criteria for Australian roads.

LED LIGHT GLOBAL POSITIONING, ROUTING COMMUNICATION SYSTEM

LED light and communication system includes at least 1 optical transceiver, the optical transceiver including a light support and a processor. The light support has a plurality of light emitting diodes and at least one photodetector attached thereto. The processor is in communication with the light emitting diodes and the at least one photodetector, where the processor is constructed and arranged to illuminate at least one of the light emitting diodes to generate a light signal which in turn includes at least one embedded data packet. The at least one embedded data packet communicates global positioning system (GPS) location information.